Print

INSTRUCTIONS - TALON Burs - getting best perfor...

INSTRUCTIONS - TALON Burs - getting best performance!

 

INSTRUCTIONS FOR USE: TriHawk TALON Metal & Crown Cutters.

Congratulations.......You have just received the sharpest and fastest cutting bur that you have ever used! 

In order for the TriHawk TALON bur to perform as designed:

o    Use a High Speed Turbine with a range of 340-400,000 rpm

– optimal setting ~ 360,000 rpm.

o    Commonly used UK alternative – variable electric, using Contra-Angle Red Ring (1:5) operating within a range of 180-200,000 rpm.

o    Please make sure that your hand piece has been properly calibrated or balanced and is “true running” to prevent the bur from whipping and breaking.

o    Please make sure your hand piece is running at full speed before the bur contacts tooth structure or other materials. Your hand piece should run at the maximum speed recommended by the manufacturer.

o    Always work in direction of rotation of hand piece for best control and accurate cutting performance.

o    Warning: Do not extend bur from chuck. Loose or extended burs could eject from the chuck or break and cause personal injury. Do not exceed the hand piece air pressure recommended by the manufacturer.

o    Insert bur all the way to the end in hand piece chuck. Burs over 23mm in length should only be used per hand piece manufacturer’s instructions. Burs must be securely tightened in hand piece chuck.

o    Remember, aggressive or faster cutting burs require a very light touch.

A feather touch! No pressure! Let our TALON Bur do all the work!

o    Use the bur ONCE and throw it away just as you would a needle or scalpel.

All brands of burs are compromised after the first use.

o    Note: Multiple usages and sterilization drastically reduce cutting performance and greatly increase the likelihood of breakage/fracture for ALL burs.

Sterilization: Sterilization of carbide burs and other instruments used in or near the oral cavity is part of the infection control guidelines. Proper sterilization of carbide burs is extremely important. While Steam Autoclave is the most common method of sterilization and can be used according to the instructions provided by the equipment manufacturer this method is not recommended for carbide dental burs as it both dulls the blades of the bur and increases the breakage rates. Tri Hawk recommends use of dry heat or chemical sterilizer. To sterilize follow the recommended procedure of the manufacturer of the sterilization equipment. It is the users’ responsibility to ensure effective sterilization. After sterilization dry the bur & store in a moisture free environment, failure to do so could damage the bur.

Note: Do not use any of the Cold Sterilizing Solutions for the sterilization of burs. These agents often contain strong oxidizing chemicals that may dull and weaken carbide burs. Most importantly, only the heat or heat-pressure systems discussed above can be monitored via biological and chemical indicators to assure sterilization has, in fact, been achieved.

If you need further assistance, please feel free to contact us at:

enquiries@dental-devices.co.uk / Khalid 07971 88 46 48 / www.dental-devices.co.uk

 

If you need further techincal assistance, please feel free to contact us at:

Tri Hawk S.A.
28 rue Marguerite de Brabant, L-1254 Luxembourg
Tel : +352 20 99 23 28 Fax : +352 20 99 23 29
www.trihawk.com
europesales@trihawk.com

Manufactured by:

Xenopus Inc.
2 Prospect Rd.
Morrisburg, Ontario, Canada, K0C 1X0

 


Display per page
Sort by

New Talon 12 (fg1158) Tester Pack of 10 Burs

Product no.: Talon 12 Tester Pack

TRIAL PACK OF 10 PIECES OF TALON METAL & CROWN CUTTING BURS

'Ideal for Precision and high Volume Crown and Bridge prep. and removal', &

"Suitable for Amalgam prep. and removal"

More Aggressive 1.2mm tip head for Volume removal.

Fast, Clean and Precise Performance!

£40.00 *

New Talon 10 (fg1157) Tester Pack of 10

Product no.: Talon 10 Tester Pack

TRIAL PACK OF 10 PIECES OF TALON 10 (FG1157) METAL & CROWN CUTTING BURS

"Precision Crown and Bridge prep. and removal"

Lesser Aggressive 1.0mm tip head.

'Ideal for Amalgam prep. and removal.', &

Fast, Clean and Precise Performance!

£40.00 *

New SURGICAL Talon 12 - Tester Pack of 10 Burs

Product no.: SURGICAL Talon 12 Tester Pack

TRIAL PACK OF 10 BURS OF SURGICAL TALON 12 - METAL & CROWN CUTTING BURS

Crown and Bridge prep. and removal; More Aggressive 1.2mm tip head.

'Ideal extra length for Jaw bone and Root preparation.'

'Removing old implant screws and posts', with

'Longer reach with 25mm Shank length for those hard to reach places'

£50.00 *

New UP TO 25% OFF PROMO - Trihawk Talon 10 - 19mm x 1.0mm dia. TC Tipped Bur

"Precision Crown and Bridge prep. and removal"

Least Agressive 1.0mm tip head.

'Ideal for Amalgam prep. and removal.', &

Fast, Clean and Precise Cutting Performance!

£150.00 *

New UP TO 25% OFF PROMO - Trihawk Talon 12 - 19mm x 1.2mm dia. TC Tipped Bur

'Ideal for Precision and high Volume Crown and Bridge prep. and removal', &

"Suitable for Amalgam prep. and removal"

More Aggressive 1.2mm tip head.

Fast, Clean and Precise Performance!

£150.00 *

New UP TO 20% OFF PROMO - Trihawk Talon 12 Surg - 25mm x 1.2mm dia. TC Tipped Surgical Length Bur

 

Crown and Bridge prep. and removal;

'Ideal extra length for Jaw bone and Root preparation.'

'Removing old implant screws and posts', with

'Longer reach with 25mm Shank length for those hard to reach places'

£110.00 *

New Trihawk 198-18 XC - Extra Course Diamond for Zirconia - Taper Rnd 19mm x 1.8mm Diamond Bur

 

FOR ZIRCONIUM CROWNS AND GROSS REDUCTION PROCEDURES, USE TRI-HAWK'S HIGH QUALITY 'SUPER COURSE' 198-18-XC DIAMOND BUR.

THE LARGER AND SHARPER DIAMOND PARTICLES CUT FASTER THAN COURSE AND MEDIUM GRIT DIAMOND BURS.

 

JUST TAKE YOUR TIME TO MINIMISE PATIENT DISCOMFORT & USE PLENTY OF WATER TO REDUCE HEAT.

 

OUR TALON BURS ARE NOT SUITABLE FOR CUTTING ZIRCONIA BUT WILL CUT THROUGH TITANIUM, AND ANY MIXED COMBINATIONS OF ENAMEL, AMALGAM, PRECIOUS & NON-PRECIOUS METALS, AND PORCELAINS WITHOUT THE NEED TO CHANGE BETWEEN BURS.

 

£30.00 *

New TALON Mixed Tester Pack of 10 Burs - Option 4

Product no.: TALON - Mixed Tester Pack Option 4

TALON MIXED 10 BUR TESTER PACK CONTAINS THE FOLLOWING METAL & CROWN CUTTING BURS:-

5 BURS X TALON 12 (1.2mm tip head on 19mm shank),

3 BURS X TALON 10 (1.0mm tip head on 19mm shank), &

2 BURS X TALON 12 SURGICAL LENGTH (1.2mm tip head on 25mm shank).

'Ideal for Precision and high Volume Crown and Bridge prep. and removal', &

"Suitable for Amalgam prep. and removal"

More Aggressive 1.2mm tip head for Volume removal.

Fast, Clean and Precise Performance!

£40.00 *

New TALON Mixed Tester Pack of 10 Burs - Option 1

Product no.: TALON - Mixed Tester Pack Option 1

TALON MIXED 10 BUR TESTER PACK CONTAINS THE FOLLOWING METAL & CROWN CUTTING BURS:-

5 BURS X TALON 12 (1.2mm tip head on 19mm shank),

5 BURS X TALON 10 (1.0mm tip head on 19mm shank).

'Ideal for Precision and high Volume Crown and Bridge prep. and removal', &

"Suitable for Amalgam prep. and removal"

More Aggressive 1.2mm tip head for Volume removal.

Fast, Clean and Precise Performance!

£40.00 *

New TALON Mixed Tester Pack of 10 Burs - Option 2

Product no.: TALON - Mixed Tester Pack Option 2

TALON MIXED 10 BUR TESTER PACK CONTAINS THE FOLLOWING METAL & CROWN CUTTING BURS:-

5 BURS X TALON 12 (1.2mm tip head on 19mm shank), &

5 BURS X TALON 12 SURGICAL LENGTH (1.2mm tip head on 25mm shank).

'Ideal for Precision and high Volume Crown and Bridge prep. and removal', &

"Suitable for Amalgam prep. and removal"

More Aggressive 1.2mm tip head for Volume removal.

Fast, Clean and Precise Performance!

£40.00 *

New TALON Mixed Tester Pack of 10 Burs - Option 3

Product no.: TALON - Mixed Tester Pack Option 3

TALON MIXED 10 BUR TESTER PACK CONTAINS THE FOLLOWING METAL & CROWN CUTTING BURS:-

5 BURS X TALON 10 (1.0mm tip head on 19mm shank), &

5 BURS X TALON 12 SURGICAL LENGTH (1.2mm tip head on 25mm shank).

'Ideal for Precision and high Volume Crown and Bridge prep. and removal', &

"Suitable for Amalgam prep. and removal"

More Aggressive 1.2mm tip head for Volume removal.

Fast, Clean and Precise Performance!

£40.00 *
*

All Quoted/Listed Prices normally PLUS VAT at prevailing UK rate, and NO LONGER includes FREE Secure Postal Delivery within the UK. Errors & Ommissions Excluded.